So seeing that I had some time on my hands today…. well not going camping…. I decided I needed a project to work on for a bit…. The antenna idea for Sunday worked like a charm and yesterdays antenna build was a bust so….
Today would be deciding project… Would I be at 2-1 or 1-2 as far as successful projects went? Read on and find out….
Recently we have been having some issues with our TV at home as our Android Box content providers (we subscribe to 3) have had issues due to that crackdown in Europe. Two of the three content providers we use just vanished…. The last one is still active but we don’t get the same quality of programming we got with other two.
We “Cut the cord” about 2 years ago when we cancelled our Bell Fibe account and switched over to a combination of OTA TV and streaming services like Netflix and Crave with some YouTube thrown in for variety.
When we lived in Ottawa our OTA content consistted of CBC, CTV 1, CTV 2, City TV, Global, Omni 1, Omni 2 and TV Ontario along with about 5 French Language stations which as I found later was exceptional for Canadian Content. As Ottawa was too far north of the Border I was unable to receive any of the American Networks….
Fast forward a year later and we had moved to Kingston. Still streaming but now had the choices of the Android Box and all the stations one could imagine. However with certain Condo Antenna restrictions (you have heard me mention them before) our OTA reception was limited to Global Kingston using an inside antenna…
Taking my camper to various locations including Lake Ontario Park ( 4 km south of here) on a day trip we managed 18 different OTA stations using the antenna on the trailers roof. However 4 km north and on the wrong side of a hill all I could get was Global Kingston.
However on a later trip just west of Bath Ontario I managed to receive 9 different stations OTA
Fast forward to today and a bored Bob heads over to Princess Auto in Kingston to look for a project and finds…
This little dream was $45.00 plus tax and came with a built in Rotor with wireless control, built in signal amplifier with power supply with all parts included…. I brought it home and had it built (assembled) in about an hour….
And after some playing with it the following was noted and I share with you
The good points
1> It does work. The instructions were fairly easy to follow.
2>The instructions also made sense to my knowledge of antennas.
3>In addition to Global Kingston (local station) I was able to watch quite clearly the CBS Station and the Fox Station both in Watertown New York.
The bad points
4> The rotor did not work
5> Although its design is excellent along with its performance, the antenna itself is very flimsy and I doubt it would stand up to a strong wind let along a Canadian Winter especially an ice storm.
6> No matter which way I swung the antenna (by hand) I could not receive the PBS Station or the ABC Station in the vicinity of Watertown
The set up
I attached a 4 foot length fibreglass mast to the stand for my patio umbrella. I then attached a 5 foot length of small diameter aluminun tubing to the fibreglass mast which fit into the bottom of the rotor. The beam was fed by some (supplied) lightweight coax (RG59???)to the amplifier and then to the TV set. The amplifier was powered by a (supplied) 15v wall wart.
If I was living in an apartment this would be my first choice for a balcony antenna. A fairly small foot print and lightweight enough to be installed on a Camera Tripod. The balcony would protect it from most of the elements and also provide the altitude needed to get the further out station especially if the built in rotor was working.
I could also see it working great as an indoor antenna (aiming it out a window) and easily out performing a set of rabbit ears or other styles of indoor antennas in the $45.00 price range.
I also think this antenna would work great for RV Portable style uses especially if your expensive RV TV antenna got damaged when you forgot to lower it before you left the Campground. (Been there…. done that)
Receiving any signals over the airwaves is dependent in being in a good location (usually high ground) to receive them. What let me watch 3 channels at a whopping 15 feet above ground might give me much better reception if the antenna was on top of our roof at 40 feet or so above ground. The phrases “Height is might” and “Location, Location, Location” are both especially true when it comes to receiving antennas for any band.
What I thought worked well for me might not work at all for you….
Or it could work better than expected….
Your mileage may or will vary and if you choose to purchase one you do so at your own risk and expense.
However due to the non functioning Rotor and the flimsy materials used in the construction I will be returning the antenna tomorrow for a refund. Don’t feel like running outside in the winter time to hand rotate the antenna or to pick up the pieces after freezing rain hits. I have no issues with its cost or performance…. Just in its quality and quality control.
So at the end of the day I would call todays project a success. I learned some stuff…. I got to watch some TV not normally accessable from home and I also proved a point (that it could be done) as well as realizing that even though it works today it might not survive the harsh elements. Lets come back with a new plan for OTA