Well its December 24th and we are having one whopper of a storm. The trees that support the longwire are still up….. The wire is slacker than usual so I’m not sure if I lost a tree branch or the wire itself snapped somewhere near the end….
But its still loading up so all is well
Stay safe , stay well and please have a Merry Christmas
73bob
Well its Sunday am and I’ve finally thawed out…. Strange thing this Canadian Weather…..
I got on the bus at 130pm Eastern and the weather was nice and sunny….. Got off the bus close to the Murney Tower at 230 pm eastern and the weather was nice and sunny…..
Walked from the bus stop to the Murney Tower and the weather was nice and sunny….Started to set up and the weather was starting to cloud over…. Called CQ POTA and the sun gave up and hid beside the clouds and the wind from Lake Ontario picked up….
The working conditions was my Xiegu X5101 with a Sota Beams Bandspringer antenna. My Shakesphere 20 foot Wonder Pole was being supported by the Heavy Duty Tripod I mentioned a few posts back….
As you probally noticed the graphics above have for the most part been recycled from my library. I did have my IPhone with me but the pics for the most part did not turn out…..
I started out on 40m and had managed to contact about 5(or so) parks when Martin VA3SIE arrived and set up his KX3 along with his ALEXLOOP antenna. He started calling on 20m CW and I kept on with 40SSB.
Martin posted an excellent Video (link below) on his part of the activation so check it out….
After a while I switched over to 20ssb and managed a contact before jumping back to 40m ssb
As the sun turned into sunset it really got cold and the wind really picked up. We packed up and moved closer to the Murney Tower to escape the wind but it still was goshdarn cold…. Martin continued to operate and I decided to leave the gear packed up….
I managed to give out Murney Tower VE4877 and the Kingston Fortifications VE4872 to 14 hunters making it a successful Two Park activation day.
Just before 6pm eastern I got my bus ride home and called it a day…. Martin decided to stay (those youngsters just don’t feel the cold) and he was making SSB contacts on 40m and 20m….. I was actually impressed seeing how easy he was pulling in the stations with the KX3 and the loop…
This will most likely be my last activation for a while. The sheer pleasure of operating portable was negated by the reality of freezing (ok the coldest I have been in quite a while) and at a certain time it just is no longer fun…. I’ll keep on hunting till things change a bit….. and if we get a warm afternoon who knows…
A Bit of POTA News….
On Friday evening the Pota Gawds determined that I had been confirmed and had make contacts with 2000 individual parks. BIG THANKYOU to the activators that made this possible. This was one of my goals and it happened earlier than I had expected….
More News
As of the time of this post my attempts to complete the “Park A Day Challenge” continue and since Jan 1 2022 I have made at least 1 confirmed contact a day with a POTA Park. As of the end of October there were 24 of us still in the Challenge…
48 Days to go….Will I make it???
Thats it for now…. I’ll post more when I have something to talk about
73bob
Starting around 3pm Eastern (2000 UTC if I did the math right) a few of us hearty souls will be trying to activate the following POTA parks:
VE4872 Kingston Fortifications
The operators will be Martin VA3SIE (KX1 or KX3) and Bob VA3QV(Xiegu X5105). It is hoped that Bill VE3FI (KX3)will be with us as well if his earlier activation allows him to make it here. The activation was also talked about on our local QRP/POTA groups (VHF and HF) weekly net so I’m not really sure how many operators will show up.
We will be spotting ourselves on POTA Spots and hope to get you in the log.
This is also fitting with the Polar Bear Moonlight Madness (PBMME) event. The event takes place on the Saturday closest to a Full Moon and is a fairly popular event for the QRP Types
This will be the first time that my XIEGU X5105 will be playing outside with other radios in close proximity. Lets hope the little rig does not get overloaded
Hope to get you in the Log
73bob
On Friday I decided to go back to Princess Auto… On my last trip there I picked up a Heavy Duty Camera Tripod to add to my Portable Station…
The Tripod gave me the option of using my ToyBox portable antenna or finding some trees that would work with my EFHW. The End Fed Half Wave is far the better antenna but the ToyBox has its good points especially as all I have to do is open up the Tripod and add a counterpoise to match whatever band I have decided to operate.
Liz hates it when I go there… Princess Auto has so much stuff I don’t need until I see it there on Sale….
That brings us to my latest purchase…
While walking around in their Surplus Section I found the following:
Its a heavy duty Tripod…. thats what they call it anyway
| SKU | 9093949 |
|---|---|
| Package (L x W x H) | 22.3 x 9.3 x 9.3 in. |
| Weight | 10.7 lbs |
| Item Name | Heavy Duty Telescopic Tripod |
So seeing that there was no one there to talk me out of it…. It followed me home… the $30.00 price tag will not break the bank…. and over the last couple of days I have tested it….
It easily supports my dual band VHF/UHF Arrow Ground Plane antenna at 20 feet above ground. Even though I would use Guys in the real world it was not needed for the quick test in my backyard…
I should add that for masting I was using 4 sections of Surplus Military masting at a lenght of 4.5 feet per section. Adding to the 18 feet of masting the Tripod also opens up to 3 feet bringing it to a 21 feet lenght in total
It also supported my Shakespear 20 foot wonderpole with no issues. This would be the support for my EFHW or an inverted Vee Portable antenna that I use occasionally…
I can actually see myself trying to buy one more… as of now the Kingston store has 6 left in stock… They started with 7 and I bought mine… I can’t get there again before Tuesday but I think that having two of those Tripods would be a great asset for my Planned Transportable Station… I would love to activate a POTA Park for a weekend and use the tripods to get a few antennas in the air… My Portable station fits in a backpack…
The planned Transportable station will be a bit heavier but…. will have more (and better) toys as well
More on the Dream Station later if I can swing some of the details
73bob
Well…. its almost 6pm and I picked up my parcel at the Post Office at 1pm…. I brought it home and got it installed on the Tripod….
Then there was some fiddling around with the MFJ Antenna analyzer and then it was time to start playing…
I had it hooked up to my Xiegu X5105 and operated from the dining room table and as you can see the antenna was placed on my deck. The location was decided by the lenght of coax I could find on short notice and the radials were decided by the available amount of white wire that I knew where to find quickly.
With careful adjustment I was able to tune the antenna but it was easier just to find the close enough spot on the bands I wanted to operate on and then just use the built in auto tuner on the 5105. The finals survived and I was hearing plenty…. Unfortunately not many were hearing me…. The problem was solved by adding a 45 foot lenght of wire to my radial pattern and then the signal reports pleased me…
Jumping back to radials the page of words for the antenna suggest that in effect you use a single counterpoise that’s a 1/4 wave lenght for each band you operate on…. I now have counterpoises for 20/40/80m and if I was able clip them together the 160m coil could be used as well…
In the short time today that I could spare for the antenna I managed to make a QRP to QRP contact with Bill VE3FI on 40m. Bill was camping at the Rideau River Provincial Park in Kemptville Ontario. My second 40m contact was with Barry VE3ISX in Hamilton Ontario. Barry was the Net Control Station for the Trans Provincial Net and was able to pull out my QRP SSB signals through his noise level.
So today it worked… and I am pleased…
Over the next few days I will re work the radials and actually set up in a Park and see what I can scare up… (Weather and Band conditions depending)
But remember this “Toy Box” is one of 3 antennas I will be using during portable ops. Its not the best one but it sure is the easiest to set up
More later
73bob
I originally going to make the title “Upgrades to the Portable Station” the realized that the title could be up for debate….
So to bring you up to speed…. My portable station consists of:
XIEGU X5105 QRP Transmitter
Antenna #1 is a homebrewed 10-40m EFHW Wire Antenna with 49:1 unun
Antenna #2 is a SOTABeams Bandspringer Wire antenna (20-40-60-80m using built in tuner in the XIEGU)
Both these antennas need cooperating trees or another support device. I do have a 33 foot MFJ Telescopic pole to help support if the trees are not an asset
Realizing that there might be a (good ) chance that on an outing the trees might not be in the right places and the pole could draw unwanted attention to my Portable Operation I purchased the following gear today…
COMET HFJ-350M TOY BOX, 1.8-50 MHZ PORTABLE TELESCOPING
ANTENNA
This antenna along with a 13 Dollar Camera Tripod from Princess Auto will complete the backup antenna system.
Mike K8MRD did a great YOU TUBE review of this antenna and you can view it here
John VE3IPS did a great review of this antenna and you can read it here on his blog
These and a few other reviews from Amateurs who know what they are talking about helped me make my choice. There were some negative reviews but mostly from newer hams who have not quite figured it out yet…
Now this antenna is not designed or intended to be my primary HF antenna… Its in the backpack because it might be the only antenna that can be used in a certain situation.
Babysitting my “Grandkits” (Sassy and Mouse )when my daughter goes away in mid January comes to mind.
I can put the Toybox/Tripod on her balcony in the evenings and make a few contacts. Her apartment is not high enough to lower the EFHW off her balcony so….
There will be more on this (much more) once it arrives and I get to play with my new Toy (Box). It was shipped today with Canada Post Expedited Parcel service and I hope to see it in the next couple of days…
CU Soon
73bob
If you remember from my last post that I had constructed an antenna to work on the 60 meter (5mhz) band. It consisted of a single 43 foot driven element and a single 43 foot counterpoise/radial fed my a 1:1 balun.
As mentioned before the above graphic is for my SotaBeams Bandspringer Antenna but my homebrewed 60m antenna (in the configuration I use) looks alot like the above.
In reality its a 60m dipole but in reality as I don’t have enough real estate to stretch out almost 90 feet of wire I use it as an End Fed inverted VEE with an elevated 43 foot counterpoise attached to my fence at about 3 feet above the ground. The SWR is good to where I don’t even need the built in tuner on my Yaesu FTR991a and so far the signal reports are fairly strong considering the very poor band conditions (darn solar storms) that we are going though right now. With the help of the built in tuner I can get it to load up on some of the higher bands but I like the long wire better….
So with the addition of the new antenna I can now operate on:
2m, 6m, 10m, 12m, 15m, 17m, 20m, 30m, 40m, 60m, 80m and 160m
Some bands are not as strong as others but I am on the air, doing the best I can from within an antenna restricted environment.
There is talk of getting a group out for some QRP activities so perhaps my Xiegu X5105 might finally get some time outside to play. More on that later this coming week
73bob
Well its still hot…. and I’m still hiding inside as much as I can… The current band conditions are not the best but I am managing to contact about 10 POTA Parks a day and so the totals are still climbing, but a bit slower than I would like.
I decided to clean out the shack…. Its cooler inside and found lots of neat “stuff”…. I think I found the complete radial system for my old vertical that I had in the air back in Ottawa…. Lots of connectors along with about 100+ feet of coax.
I also as I was finding “stuff” I decided to do some antenna “stuff”… For a while I have been putting off creating an antenna for 60m.
Seeing that ISED Canada has increased the amount of spectrum in the 60m band it seems that now would be a good time. I decided on a end fed inverted “Vee” antenna along with a single counterpoise. All of this being fed by a 1:1 Balun….
The driven element and the counterpoise are both 43 feet long with the driven element going over a tree branch and the counterpoise bending around objects to keep within my small yard.
Check out https://www.sotabeams.co.uk/bandspringerMidi40m30m20m/ for more info.
Early tests show the antenna having a very respectable SWR on the (5) 60m Channels we are allowed now. I did not need the built in tuner on the FT991A.
The band conditions at the time were not strong (very weak) so no one was able to give me signal report, but as it loads up fine I am sure it will work for me.
I will not be using the new allocation that Canadian Amateurs are allowed until Yaesu comes out with a new firmware upgrade that unlocks that part of the band for us.
The other bit of antenna “stuff” I did today was re-wire my 40M End Fed Half Wave (the one from my portable station) with small gauge wire. It was made of 18 gauge and the smaller 25 gauge wire is much lighter and easier to work with and anything that lowers the weight of my backpack is appreciated by my back. Although all I did was replace 65 feet of wire I will test this out later at a local park if (and when) it cools off a bit.
Once I test it out I’ll let you know….
Thats about all for now…. CU soon
73bob
Well two weeks later and 100 new POTA parks in my log and I am still learning “new stuff”….
The FT991a is living up to all its hype and is a dream to operate… If you use it right out of the box with the default settings its a good radio…
If you RTFM and customize your Transmit audio settings and your Receive filter settings its a FANTASTIC radio to use.
Like I mentioned at the beginning of this post…
So far I have added 100 unique parks to my Parks list… A few in CW but most of them in SSB.
This would also include the K7K DXPedition to Kiska Island in SSB (95w ssb and CW (40w). Both contacts were made on 17m
No digital at this time but until I’m sure that my NUE PSK Modem that works well my my older Yaesu Radios will also work well with the 991a I am not going to take a chance on bricking the rig…
As I mentioned above I have even made a few CW contacts. The 991a has a very good built in Contest Keyer and when I use it with my IPAD and the HotPawz Decoding app I can “5nn TU” with the best of them. My contacts have all been Search and Pounce and I use an app to fill in the blanks but… Its still a contact…
Now before the flames start let me remind you of my post back in December where I described the Pro’s and Con’s of the setup. It can’t decode a bad fist but as most of the people I am contacting are also using keyers… It works for me… And for the record (full disclosure here) my XIEGU X5105 has a contest keyer built in along with a fairly good decoder also built in…. Still nothing but S&P but still much better than nothing.
For now I am still very pleased with my purchase and looking forward to more DXPeditions and POTA contacts. It will be the perfect way to finish the summer along with starting of the fall season…
73bob
Its been a while since I had to get a portable station running…. Gone is the FT817/LDG Tuner combo and here is the Xiegu X5105 with the built in auto tuner.
Also gone is the Buddipole Deluxe, W3EDP antenna and the PAR Endz Fed QRP Tribander and…
Here is my homebrewed 40m EFHW 49:1 and a Sotabeams 10-60m inverted VEE antenna (pic below)
But with the new toys come new issues and its been a challenge getting them all fixed up…
So far the EFHW antenna is doing whats expected of it and more. The “more ” part being letting some stray RF get into the transmitter which is causing havoc with my audio…
The transmitter is getting good signal reports on 20m and 4om which are the two bands that use for the most part until the RF finds its way into the transmitter.
At first I thought that I just had the audio running hot…. and that was causing the audio to distort… I tuned things down and then hooked up to my home antenna and…. the results were fantastic…. using a remote SDR Receiver in PA (thanks K3FEF) I was able to listen to myself and proclaim the problem solved….
And it was solved till I went out to the park for my next test…
Back in the park I found that the noise had returned…. and my audio was a crappy as ever (using the EFHW). After talking to a local ham who swears by (not swears at) the EFHW for portable use it was suggested that I try adding a ground from the coax connector at the balun end…. It might be a bit of overkill as the only clamps I had were from a battery project so I have a pretty good ground connections now… Take a close look at the pic.
Anyway it worked today… although the band conditions were not too good I did manage a 40ssb local contact. The report was not strong but he commented that the audio was fine with no distortion. I also was able to check into the 20m Salvation Army SATERN net and was heard by the NCS who commented that for 5w the signal was ok and the audio clear and chrisp…
Back to the pic for a minute and you might notice that I am using the 66 foot EFHW antenna in the sloper configuration with the end of wire up near the top of a 33 foot MFJ mast that I have leaning back into a tree. The set up works fairly well for me and the masting sways with the wind and requires no guying. The test worked fairly well for me… I fought the static and QSB and managed to get heard. So at this time I guess the extra ground is working… I want to go out a set up a few more times and make sure that the gremlins are gone before I attempt a POTA Activation. This weekend is a POTA Support your local parks weekend so I would like to Activate during the day…. come home and hunt in the evening… Lets see how that works for me…
In the meantime I am the “POTA Hunter”… but with any luck could be the “Hunted” soon.
73bob
My Amateur Radio Life 